Selamat datang di steelindonesia.com
6 Year, Platinum Company
Selamat datang di steelindonesia.com
6 Year, Platinum Company
Kategori
Plate Driling Machine
Nama Brand
Auten
Kemampuan Pasokan
-
Stock
-
Applicable Industry:
It is used for drilling holes in steel plates. The workpiece to be processed can be steel structure buildings, bridges, connecting plates on iron towers, or large flanges, heat exchanger tube plates, etc. The CNC drilling machine can make the whole process of drilling work to achieve a complete automation degree with high precision and high efficiency. It is suitable for drilling and processing of connecting plates, anchor plates, end plates, templates, flanges, structural parts and other parts of steel structures, bridges, power communication towers, thermal power station boiler brackets and other industries.
Features:
1. The maximum drilling diameter of this machine is up to 50mm, and the holes on the connecting plate and the foundation plate can be drilled.
2. The maximum workpiece thickness is 100mm, and thinner plates can also be stacked and drilled. The workpiece is clamped by hydraulic clamps, which saves labor for operators and saves time when loading and unloading workpieces.
3. The largest workpiece can reach 3000×2000mm. If it is a small piece, it can be installed on the four corners of the worktable (Note: The tightening method is divided into hydraulic automatic tightening).
4. The screw, guide rail, hydraulic parts, electrical components, numerical control system, etc. configured by this machine are mostly foreign famous brand products. The reliability of the machine is comparable to that of imported equipment, and there are few failures.
Specifications:
Item | Parameter | |
Workpiece size | Width x length | 3000x2000mm |
Thickness | Max.100 | |
Diameter | 2000mm | |
Spindle | Quick-change connector | Morse 4# |
Drill diameter | Max.Φ50mm | |
Speed-varying method | Inverter stepless speed regulation | |
Rotate speed | 20－560r/min | |
Stoke (Z axis) | 180mm | |
Feeding | Hydraulic cylinder drive | |
Workpiece Clamp | Clamp thickness | 15－100mm |
Number of clamping cylinders | 12 | |
Clamp force | 7.5kN | |
Clamp open | Foot switch | |
Cooling liquid | Method | Forced loop |
Capacity | 300L | |
Applicable Industry:
It is used for drilling holes in steel plates. The workpiece to be processed can be steel structure buildings, bridges, connecting plates on iron towers, or large flanges, heat exchanger tube plates, etc. The CNC drilling machine can make the whole process of drilling work to achieve a complete automation degree with high precision and high efficiency. It is suitable for drilling and processing of connecting plates, anchor plates, end plates, templates, flanges, structural parts and other parts of steel structures, bridges, power communication towers, thermal power station boiler brackets and other industries.
Features:
1. The maximum drilling diameter of this machine is up to 50mm, and the holes on the connecting plate and the foundation plate can be drilled.
2. The maximum workpiece thickness is 100mm, and thinner plates can also be stacked and drilled. The workpiece is clamped by hydraulic clamps, which saves labor for operators and saves time when loading and unloading workpieces.
3. The largest workpiece can reach 3000×2000mm. If it is a small piece, it can be installed on the four corners of the worktable (Note: The tightening method is divided into hydraulic automatic tightening).
4. The screw, guide rail, hydraulic parts, electrical components, numerical control system, etc. configured by this machine are mostly foreign famous brand products. The reliability of the machine is comparable to that of imported equipment, and there are few failures.
Specifications:
Item | Parameter | |
Workpiece size | Width x length | 3000x2000mm |
Thickness | Max.100 | |
Diameter | 2000mm | |
Spindle | Quick-change connector | Morse 4# |
Drill diameter | Max.Φ50mm | |
Speed-varying method | Inverter stepless speed regulation | |
Rotate speed | 20－560r/min | |
Stoke (Z axis) | 180mm | |
Feeding | Hydraulic cylinder drive | |
Workpiece Clamp | Clamp thickness | 15－100mm |
Number of clamping cylinders | 12 | |
Clamp force | 7.5kN | |
Clamp open | Foot switch | |
Cooling liquid | Method | Forced loop |
Capacity | 300L | |
